Do I Need A Modem For Nbn Fttp. networking Could I run a NBN FTTP connection directly through a switch and ditch my WiFi With the new NBN FTTP, do I still need a modem/router or can I just use a router? I really don't want to connect a Wi-Fi 7 router to a crappy Telstra Smart Modem :) I was going to make the switch to AGL (horrible horrible service) but cancelled the changeover for bad advice and lots of mistakes made over a 2-hour call. If you have a combined modem + router + Wi-Fi device, chances are good that it also has an Ethernet WAN port, and you can use it with FTTP, and its modem functionality is unneeded and unused.
How to set up for NBN Fiber to the Premises FTTP HFC FTTC (PPPoE) for Billion modem from www.youtube.com
If you can only find 'modem' then you may need to opt for a different modem or buy a router in addition. For HFC and FTTP it's called an NTD, for FTTC it's called an NCD
How to set up for NBN Fiber to the Premises FTTP HFC FTTC (PPPoE) for Billion modem
This will plug directly into your NBN connection box mounted to your wall Here's what equipment you'll need for each different NBN connection type: Fibre to the Premises NBN: You'll need a router If you can only find 'modem' then you may need to opt for a different modem or buy a router in addition.
How to set up for NBN Fiber to the Premises FTTP HFC FTTC (PPPoE) for Billion modem. This will plug directly into your NBN connection box mounted to your wall Do I need a router/modem for FTTP? As shown in the first illustration, this type of nbn connection requires a compatible router with a WAN or Internet port that will plug into the nbn™ connection box
Set up nbn FTTP with a Smart Modem Gateway (VX420G2H) YouTube. Plug the WAN port of your router to the designated UNI-D port on the NBN box on the wall (the NTD), set up a connection on your router with PPPoE and enter the credentials that Exetel sent you via SMS. You just need a router with an Ethernet WAN port that can plug in to the NTD